Advertisement

Is it legal to flash your high beams at drivers with lights off? What California law says

With a number of vehicles now equipped with automatic headlights, drivers may not notice when theirs are off.

Can you flash your high beams to let someone know their lights aren’t on?

Vehicle Code 24409 says if you’re approaching an oncoming vehicle within 500 feet, you cannot use your high beams. You also can’t use them within 300 feet to the rear of a vehicle you’re behind.

Legally, you cannot flash your high beams to signal to a motorist that their headlights are off.

When should you use high beams in California?

Progressive says that you use high beams when you’re on the highway or roads along the countryside, since these are often long stretches of roads where there is less light and traffic.

You should use your headlights when it’s too dark to see from 1,000 feet away, the California Department of Motor Vehicles recommends. But if it’s raining, foggy, snowing, or you’re within the limits of another vehicle, use your low beams.

Foggy conditions are hard to drive in and high beams can make it more difficult.

In the Central Valley, tule fog, which is thick fog caused by moist marine air, light winds and clear skies, is common from November to February.

High beams in the fog create a glare, making it hard to see. If you have fog lights on your car, use them, otherwise stick to low beams.

Can you get a ticket for using your high beams wrong?

According to Shouse California Law Group, if a driver is caught violating Vehicle Code 24409, the fine is around $238.

The driver will also get one point on their state driving record, which can lead to license suspension if the points accumulate.

What do you want to know about life in Modesto? Ask our service journalism team your top-of-mind questions in the module below or email servicejournalists@modbee.com.