From the bitter reality of needing to make staff cuts, to questions over its actual future, McLaren has not let any of that distract it as it has emerged as one of the contenders for a top three spot in the constructors' championship.
Podium finishes for Lando Norris in Austria and Carlos Sainz in Italy were not just down to luck, as the MCL35 has been quick – and is now a regular in Q3 and the battle for points.
The MCL35 is a continuation of the ground work already laid down by the team in recent years, with a measured approach taken to developing the various concepts already on the car.
That work has delivered an all-round boost and a car that seems relatively easy to setup and get the best from at each and every track.
But that's not to say that the MCL35 isn't innovative either though, with particular attention paid by the team to the design of the chassis in order that it can exploit its aerodynamic potential.
McLaren MCL35 chassis front
For example, its keel-shaped chassis design underlines its commitment to pushing the limits of the regulations and construction techniques in order that it can drive more airflow to critical areas of the car.
McLaren MCL35 front wing detail
Switching tack and moving forward to the front wing, it's also important to note that McLaren has made changes to its front wing design to work in harmony with the ones already mentioned.
The alterations have coincided with the trend for Pirelli to increase the minimum tyre pressures this season when compared with last season.
These changes alter the flexibility of the tyre's sidewall under load and thus alter the shape and ferocity of the wake turbulence generated, affecting the rear of the car in a slightly different way than before.
Meanwhile, the changes made by McLaren largely centre around the way the wing works in the outer section, with the team combining what it learned in 2019 when the regulations changed, and some of their aerodynamic tricks and tools were lost.
As such, it has developed a solution that may deliver less peak performance but draws the airflow across and around the front tyre in a more consistent and predictable manner, improving performance downstream.
McLaren MCL35 new barge boards
To alter the performance of the central portion of the car and take advantage of the other changes made up and downstream of them, there has been a continuous development of the bargeboards and sidepod deflectors.
Like most of the field, McLaren has opted to use what's known as a boomerang winglet on top of the main vertical bargeboard that connects with the outer sidepod deflector panels.
The shape of the boomerang is usually dictated by the various elements that make up the bargeboard's footplate beneath. It features slots within its surface to mirror those below, in order to maintain legality.
To define the airflow's passage through this region the team added two L-shaped appendages in Austria (blue arrow), whilst tests were conducted in Belgium to include the venetian-blind like slats beneath the main sidepod deflectors (red arrow).
This is a design concept we've seen from several other teams on the grid already, with the proposed intent of these slats being that they create a string of vortices along the cars flank.
Only Sainz had this latest development at his disposal for the Italian GP though, with the production and availability of parts during 2020 stretching the teams to their absolute maximum.
McLaren MCL35 cooling, Hungarian GP
At the rear of the car, the team has displayed the usual decorum when it comes to having different wing options available for the various track configurations.
It has sometimes paired with a T-Wing, sometimes without, whilst a focus has also been placed on the size and shape of the rear cooling outlet.
The team knows only too well that performance, both from a power unit perspective and in terms of aerodynamics, can be won and/or lost here, and so it's critical to make the right choices during the course of a race weekend.
The slat (red arrow) was added for the Hungarian GP as a way of increasing the flow volume that's extracted from the outlet, without having to make entirely new bodywork. In fact it's a trick we've seen the team perform on previous occasions too.
Meanwhile, the team also trialled a new floor section in Austria (inset). It's a similar solution to what we've seen Ferrari use this season and featured a raised section ahead of the rear tyre that connects to the inboard vertical strake.
It hasn't appeared again since, but certainly suggests that the team are open to investigating different solutions in an effort to improve performance.
McLaren MCL35 rear
The unique high speed characteristics of Monza forced all of the teams last weekend to focus their effort on drag reduction, with McLaren choosing its lowest downforce option yet, as seen here when compared with its choice in Belgium.
This allowed both drivers to reach speeds of around 350km/h, keeping them out of the reach of the Mercedes powered cars of Lance Stroll and Valtteri Bottas as they went on to take second and fourth place at the Italian GP respectively.